Artisan Facilitator Training with Bluebirds and Dragonflies

November 26, 2023

Artisan group with green darner dragonflies made at artisan facilitator training

We learned some years ago that just because an artisan is good at making crafts doesn’t necessarily mean they are good at teaching others to do so.  So we now have a special workshop to train artisan facilitators who will lead the craft making workshops, develop new crafts, and become leaders in their artisan associations.  We held our most recent artisan facilitator training at the Minga Peru workshop center near Nauta in October with twenty artisans from seven of our partner communities.

Yully Rojas and Rosita measure chambira before making bluebird ornaments

For the first two days, the participants worked in small groups to make bluebird ornaments.  We weighed the amount of chambira palm fiber and secondary leaf strands (“bagasso”) and wire and number of glue tubes that the groups received so would could estimate how much material would be used to make these bird ornaments.

Paper template for the wires used to make bluebird ornaments

While our artisan partners have steadily improved the quality of their bird ornaments, we introduced a paper template that had outlines of the shape and length of the wires that would be used to make the body, head, wings and tail of the bird so the artisans could make them with as much consistency and anatomical accuracy as possible.

Using wire loops to measure the length and diameter of a bluebird ornament body

Each artisan was responsible for making their own set of wires from these templates and using them to guide the making of the inner part of the bluebird body with “bagasso” which is often treated as a waste product because this secondary part of the leaf cannot be easily colored like the primary quality fiber.  As each person make this first part of the bird, they compared them with each other to strive for the correct length and diameter.  During a break before lunch, everyone examined their collective efforts.

Bora artisans examining chambira bodies for bluebird ornaments

Most of the artisans from Amazonas arrived late at noon since they had had to meet with representatives from a eco-tourism company to resolve issues related to their bringing clients to their village.  Our experienced facilitator Pablo helped them understand the lessons from the morning, and they resumed working on their birds under lights at night to catch up.

Amazonas artisans making bluebird ornaments at workshop

While our initial goal was to have each artisan make two birds at the same time to simulate the technique used by experienced artisans making multiples of one species, we dialed back this goal to one bird per person during the first two days when we realized that we wanted artisans to focus on learning facilitation skills more than maximizing production during this workshop.

Bora artisan Javan making bluebird ornament

Another challenge we have often faced making bird ornaments that look like the actual species is consistently preparing the proper color.  While artisans can use natural plant dyes to make many types of crafts, we have learned that artisans need to use synthetic dyes to make birds and butterflies because these animals have many colors that are not available from plants and contact with the glue needed to put the ornaments together discolors the chambira fiber dyed with plants.  While we found a synthetic blue that closely matched the blue in the bluebird, we were frustrated finding dyes to represent the rust color found on its breast.  We, therefore, greatly appreciated the patient efforts of Wilson, a young artisan from San Francisco, who tried seven different combinations of brown and orange powder before he finally hit on just the right color for the accent of the bluebird, towhee and other birds.  He provided this rough formula to a group of artisans at the workshop who did their own trial and error to produce a large batch of chambira fiber with this key color.

Artisans dyeing rust color chambira palm fiber for bluebird ornaments

As progress on the bluebirds progressed, the role of the facilitator within each small group became increasing important.  This task rotated among each member every 20 minutes so everyone regularly got the opportunity to closely observe their group mates and share any feedback they thought would be helpful.

Maria Canelos practicing artisan facilitator role making a bluebird ornament

When the bluebirds were made, we reweighed the chambira and wire that were left.  We subtracted these from the starting amounts and estimated the amount of glue, dye, and beads (for the eyes) that had been used so we and the artisans could get a better idea of the amount and cost of materials needed to make these ornaments.  They were rough calculations, but these results showed that these costs were about 10% of the amount that we paid for them.  The results also showed that the artisans earned four to twenty times as much per chambira leaf making these bird ornaments than other material intensive crafts like bags, baskets and hammocks.

Amazonas artisan Francisca Orosco with bluebird ornament

We began the third day with a brief presentation about the way that bird beaks, feet, and eye placement tell a lot about what, where, and how a bird gets its food.  Insect feeders generally have long sharp beaks while seed feeder beaks tend to be stubby and strong.  Water bird legs are generally long and have long toes or web feet.  The eyes of owls and other raptors face to front to give them binocular vision for hunting while most other birds have their eyes on the side of their heads to give them a broad view of potential threats.  We followed this with a fun quiz with rapid fire images of different birds, and the first person to call out the proper type of feeder was tossed a piece of candy.

Hawk and scarlet macaw heads

In preparation for another group activity, all of the participants were challenged to stand in close quarters on a tarp and flip it from the blue to the black side in the shortest amount of time without anyone stepping off the plastic.  After their first try, they were given a chance to discuss their strategy and reduced their time in the second try.  Noticing that most of the instructions were being called out by the few men in the group, the third try required that only women could vocally direct the group and they improved their time once again while the men were silent.

Artisans do tarp flip challenge at facilitator training in Nauta

The final challenge of the workshop was giving groups of four or five people several photos of the Green Darner Dragonfly (a common species in the US).  They were then invited to work together to make three ornaments with specific dimensions.  Most artisans came up with their own ways to make the body and fine webs of the wings while one group tried to emulate the technique used in one model done by another artisan several years ago. 

Artisan group with green darner dragonfly ornaments

One group used an assembly line process, two groups had each person do their model with attempts to do them in consistent ways, and the fourth group had their most experienced artisan make a sample first before proceeding to make the others.  None of the versions were ready to serve as a prototype for a large order, but it was great practice for these potential artisan leaders to collectively think through how to make a very different sort of craft. 

Green darner dragonfly ornament made at artisan facilitator training

The feedback that we received at the end of the workshop was truly heartwarming.  The most common type of comment was that every person improved their craft-making by learning from many other artisans.  The newer artisans, in particular, understood better that being facilitator did mean they needed to be or act like the “expert” to fill this role well.  Facilitators should of course share what they know, but beginning and experienced artisans all benefit by remaining humble, enthusiastic about learning, and committed to encourage and affirm their fellow artisans.  So many artisans said that the thing they most wanted to bring back to their communities was this spirit of working in a mutually supportive environment.

Artisans waving goodbye after artisan facilitator training at Nauta




Leave a comment

Comments will be approved before showing up.


Also in News

Puca Urquillo artisans cooperate to build a bird's nest to withstand an impending flood
Strengthening artisan organizations in Puca Urquillo

November 26, 2023

"While concepts like punctuality, mutual respect, no put downs of self or others, and listening when someone else is speaking may seem like obvious guidelines to form a positive community, a commitment to actually practice and hold each other accountable to observe these agreements is profound in a culture where showing up late, malicious gossip, and interrupting a speaker are painfully common."

Continue Reading

A Traditional Bora Dance and Craft Display
A Traditional Bora Dance and Craft Display

November 25, 2023

"Both men and women wore garb made with bleached llanchama tree bark painted with graphic figures from Bora clans.  Several wore headdresses made with the feathers from macaws and parrots.  They discussed the importance of nature and craft-making in their culture and then launched into a lively dance where the men chanted and pounded sticks into the ground to the rhythm of moving around in a circle.  Visitors joined the undulating lines to share the vibrant energy."

Continue Reading

Bora artisan Maria with woven chambira monarch butterfly at Brillo Nuevo
Butterflies and Birds at Brillo Nuevo

November 24, 2023

"Artisans in this special group would be expected to make a significant number of chambira bird ornaments since these are our best-selling products, but they could also meet their target with our orders for woven butterflies, belts, guitar straps, hot pads and other crafts.  While the opportunity to earn a steady income, learn to make new crafts (like woven dragonflies) and gain other benefits through this program was interesting to many artisans, meeting the craft-making goal still seemed very high to many."

Continue Reading